PHOENIX QUINT-PS-100-240AC/24DC/10

PHOENIX QUINT-PS-100-240AC/24DC/10 Product Details

The PHOENIX CONTACT QUINT-PS-100-240AC/24DC/10 is a reliable and efficient single-phase, primary-switched power supply unit designed for DIN rail mounting. It provides a stable and regulated 24 V DC output voltage with a nominal output current of 10 A, making it suitable for a wide range of industrial applications. This power supply is part of the QUINT POWER series, known for its high functionality and reliability.

Product Parameters

Here are the key technical specifications of the QUINT-PS-100-240AC/24DC/10:

Input Data:

• Nominal Input Voltage Range: 100 V AC ... 240 V AC

• Input Voltage Range: 85 V AC ... 264 V AC / 90 V DC ... 350 V DC

• AC Frequency Range: 45 Hz ... 65 Hz

• Frequency Range DC: 0 Hz

   

• Current Consumption: approx. 2.34 A (at 120 V AC), approx. 1.2 A (at 230 V AC)

• Nominal Power Consumption: 264 W

• Inrush Surge Current: < 15 A (typical)

• Mains Buffering: > 50 ms (at 120 V AC), > 50 ms (at 230 V AC)

• Input Fuse: 6.3 A (slow-blow, internal)

• Recommended Circuit Breaker: 10 A ... 16 A (Characteristics B, C, D, K)

• Type of Protection: Transient surge protection

• Protective Circuit/Component: Varistor

• Discharge Current to PE: < 3.5 mA

Output Data:

• Nominal Output Voltage: 24 V DC ±1%

• Setting Range of Output Voltage (U<sub>Set</sub>): 22.5 V DC ... 28.5 V DC

• Nominal Output Current (I<sub>N</sub>): 10 A (up to 60°C)

• POWER BOOST (I<sub>Boost</sub>): 15 A (for short-circuit)

• Derating: 60 °C ... 70 °C (2.5%/K)

• Connection in Parallel: Yes, for redundancy and increased capacity

   

• Connection in Series: Yes

• Feedback Voltage Resistance: 35 V DC

   

• Protection Against Surge Voltage on the Output: ≤ 35 V DC

• Maximum Capacitive Load: Unlimited

• Active Current Limitation: approx. I<sub>BOOST</sub> = 15 A (for short-circuit)

• Control Deviation: < 1 % (load change, static 10% ... 90%), < 2 % (load change, dynamic 10% ... 90%), < 0.1 % (input voltage change ±10 %)

• Residual Ripple: < 60 mV<sub>PP</sub> (with nominal values)

• Output Power: 240 W

General Data:

• Efficiency: > 91 %

• MTBF (IEC 61709, SN 29500): > 500,000 h (at 40°C)

• Degree of Protection: IP20

• Ambient Temperature (Operation): -25 °C ... 70 °C (derating > 60 °C)

• Ambient Temperature (Storage/Transport): -40 °C ... 85 °C

• Mounting Position: Horizontal DIN rail NS 35, EN 60715

• Connection Method: Pluggable screw connection

• Conductor Cross Section (Solid/Stranded): 0.2 mm² ... 2.5 mm² / 0.2 mm² ... 2.5 mm²

• AWG/kcmil: 24 ... 12

• Weight: approx. 1.3 kg

• Dimensions (W x H x D): 85 mm x 130 mm x 125 mm

Product Advantages